Enseignants
Comment impliquer les élèves, s’inscrire et approuver leurs projets. Les élèves utilisent le Guide des élèves.
Jour de l'Expo-sciences : samedi 3 avril 2027 à École secondaire St. Lawrence.
Impliquer les étudiants
Trois façons courantes de participer, et combien de temps il faut s’engager.
Façons de participer
- Un projet de classe. De nombreux enseignants attribuent l’Expo-sciences comme projet de classe. L’Expo-sciences correspond au continuum de l’enquête scientifique (primaire) et à la filière Compétences d’investigation scientifique (secondaire) du programme ontarien.
- Une Expo-sciences scolaire d’abord. Certaines écoles organisent leur propre Expo-sciences et envoient les gagnants à notre Expo-sciences régionale, en utilisant le quota scolaire.
- élèves indépendants. Certains élèves réalisent un projet eux-mêmes et demandent de l’aide pour l’inscription. Cela fonctionne aussi.
Une façon simple de commencer
- Montrer aux élèves le guide de l’élève afin qu’ils puissent voir ce qui est attendu et quand il est à remettre.
- Faites choisir tôt une expérience ou une étude, ainsi que des matières et un défi.
- Vérifiez chaque idée par rapport à Mon projet est-il autorisé ? avant de collecter des données.
- Laissez aux élèves le temps de rédiger le rapport. C’est la partie qui est verrouillée à la date limite.
- Les élèves plus jeunes de la 1re à la 5e année peuvent inscrire Science sur le mur.
Téléchargements
-
Information package (PDF)
Entry deadline, quota, eligibility and display rules on one printable sheet.
Inscrivez-vous et inscrivez les étudiants
Rejoignez en tant qu'enseignant et voyez comment les projets de vos élèves vous parviennent.
Étape par étape
- Connectez-vous ou créez un compte.
- Rejoignez-vous en tant qu’enseignant pour cette année de l’Expo-sciences. Choisissez votre école.
- Les élèves créent leurs propres comptes, rejoignent en tant qu’élèves et enregistrent un projet, vous nommant comme enseignant parrain.
- Quand un élève soumet son projet final, vous recevez un e-mail.
- Connectez-vous et examinez le projet dans votre liste de projets d’enseignant, puis approuvez-le là-bas.
- La soumission et votre approbation doivent toutes deux être faites avant lundi 8 mars 2027 à 22 h 00. Après cela, l’inscription et le rapport sont verrouillés.
Les élèves et les enseignants peuvent s'inscrire à tout moment. La seule date limite est celle de soumission des projets, et cela couvre aussi votre approbation. Si un élève ne vous trouve pas lors de l'inscription, vérifiez que vous avez commencé à être enseignant cette année.
Le quota de votre école
Combien de projets votre école peut engager.
Quota de projet
Chaque école sélectionne ses propres candidatures. Le nombre d'inscriptions dépend du nombre d'élèves de la classe :
| Population de la classe | Entrées |
|---|---|
| de 1 à 100 | 4 |
| 101 à 150 | 5 |
| 151 et plus | 6 |
Vous choisissez la manière de choisir les candidatures de votre école. Si vous avez des questions, contactez chair-test@ucsfair.org.
Approbation de la sécurité et de l’éthique
Ce que vous approuvez dans le portail, et quand le président doit être impliqué.
Ce que signifie votre approbation
Lorsque vous approuvez un projet dans le portail, vous confirmez que la manière dont il sera mené est sûre et éthique, et qu'il s'agit du travail des étudiants eux-mêmes. En particulier :
- Aucun test sur des animaux à colonne vertébrale (vertébrés). Les élèves ne peuvent les observer que dans leur habitat naturel.
- Tout test sur des personnes, même une enquête, nécessite un formulaire de consentement signé de chaque participant. Rien de ce que les élèves mangent ou boivent n'est autorisé.
- Tout ce qui concerne des micro-organismes, de l'ADN ou des lasers a été approuvé par la chaise.
- Les armes à feu et explosifs ne sont jamais éligibles.
Les projets impliquant des participants humains, des animaux, des micro-organismes, de l'ADN ou des lasers doivent être présentés avec la chaise avant que les élèves ne commencent. Veuillez demander aux élèves de le faire. Contact : Jason Marshall, chair-test@ucsfair.org, 343-370-7469.
Pour les participants humains, les étudiants remplissent le dossier de consentement éclairé humain et le comité d'éthique de l'Expo-sciences l'examine.
Le contrôle de sécurité de l’affichage
Cela est distinct de votre approbation. Pendant que les élèves installent vendredi 2 avril soirée, chaque exposition est contrôlée par la sécurité. Les présentoirs ne peuvent pas contenir de liquides ouverts, de produits chimiques, de flammes, d'éléments électriques chauds ou exposés, de pièces tranchantes ou mobiles, ni de lasers. Les problèmes doivent être corrigés ou le projet est disqualifié. La liste complète est sur Construisez votre présentoir.
Aider au contenu du projet
Les enseignants utilisent les mêmes guides que les élèves.
Lorsque vous aidez les étudiants avec le projet lui-même, utilisez les mêmes pages qu’eux, afin que tout le monde entende la même chose :
Les classes de la 1re à la 5e entrent dansScience sur le mur, un programme d’affiches avec sa propre date limite : les affiches doivent être remises lundi 8 mars 2027. Les étapes pour les enseignants se font en Science sur le mur (de la 1re à la 5e).
Information package
Entry deadline, quota, eligibility and display rules for Grades 6 to 12.
All registration forms must be received by lundi 8 mars 2027 à 22 h 00. The project must be submitted, and approved by the teacher, by then.
Registration is completed online at ucsfair.org, where the project report and other information is uploaded. Students and teachers can sign up at any time. Contact info-test@ucsfair.org if you need assistance.
If the French and English versions of this package disagree, the English version applies.
Important rules
- No more than two students may work on a project.
- If students from two grades work on one project, it is judged at the higher grade.
- Both students must be in Grade 6 or higher.
- Students in Grades 6 to 12 may enter the fair. Grade 6 students (Atom Division) are not eligible to win a trip to the Canada-Wide Science Fair.
- Each school selects its own entries, using the quota below.
- Use the eligibility rules in this package before a project begins.
Project quota by grade
| Grade population | Number of entries |
|---|---|
| 1 to 100 | 4 |
| 101 to 150 | 5 |
| 151 and more | 6 |
Categories
- Life Sciences
- Physical Sciences
- Engineering
- Computers
On the registration form, students choose up to 5 subject areas in these groups and one Youth Science Canada challenge. The lists are on Choose your project.
Divisions
| Division | Grades |
|---|---|
| Atom | Grade 6 |
| Junior | Grades 7 and 8 |
| Intermediate | Grades 9 and 10 |
| Senior | Grades 11 and 12 |
Types of projects
Experiment: Predict the results of a test you can perform. Carry out the test, collect the results, make sense of the results, and draw conclusions.
Study: Collect information by observing the world around you. Consult books, magazines, experts, the internet and so on. Sort it out and summarize the important and interesting points. It may be difficult or impossible to control the variables.
Note regarding experiments
The project experiment is not to be conducted on the exhibit floor. Participants are encouraged to have props and pictures that show the stages of the experiment. Under certain conditions, demonstrating parts of an experiment that meet the safety check may be allowed. Anything that does not meet the safety check is not permitted on the exhibit floor.
Note regarding language
Students choose the language in which their project is judged. The report, display board and any other information must be in that language.
Projects involving testing on animals or humans require special arrangements. Contact the chair before beginning the project. If the project involves people, also complete the human informed consent forms before starting.
Jason Marshall, UCSF Chair: chair-test@ucsfair.org, 343-370-7469
Human participants
You must contact the chair, outlining the proposed use of human research participants, before beginning the project, and complete the human informed consent forms. Those forms must be submitted before the project starts.
Using yourself as a participant counts as human participation, and the same forms must be submitted to the chair before starting.
Projects involving ingestion (anything people eat or drink) are not permitted.
Any project without the requested forms will not be considered for the Canada-Wide Science Fair.
The steps, and the consent package, are on Is my project allowed?. When the project is registered, the "Before you start" questions open a Human participants form on the project page. The ethics committee reviews the Letter of Information before any data is collected.
Animals
Projects involving animals are eligible only under rigid conditions. You can observe animals with a backbone (vertebrates, such as fish, birds, dogs, cats, lizards, hamsters and mice) in their natural habitat. You cannot use animals with a backbone in any active investigation. You cannot display animals at the fair. Fertilized eggs must not be part of any investigation.
Contact the fair before beginning any experiment involving animals, to confirm it meets the ethical standards agreed upon by the scientific community.
Other eligibility
Firearms or explosives: the project is not eligible for the fair.
Micro-organisms or moulds: some are prohibited by law. Contact the chair, outlining the proposed use, before beginning the project.
Plants or soil: allowed at our fair.
DNA or animal viruses: contact the chair before beginning, and have a certified scientific advisor and supervisor.
Lasers or high-energy radiation: the work must be directed by a certified supervisor. Contact the fair before starting. All lasers are prohibited from being displayed at the fair, including laser pointers.
Backboard
Usually, students use a 3-sided display. Pre-made cardboard display boards can be purchased from Dollarama, Staples or Michaels (prices vary by store). Dimensions vary by product.
Any backboard material the school approves may be used. Students may construct their own display board.
Display rules
- All cloth, paper and similar materials must be fastened securely to the backboard.
- Only single sheets may be attached to the backboard.
- Nothing may hang from the table.
- No wall may be used to support or display any part of the project.
Size
Every project is allocated the same space and cannot go beyond it. The project and everything that goes with it must fit in about 130 cm wide by 70 cm deep (54 by 28 inches). Tall parts, on the table or standing on the floor, can go up to 3.5 m from the floor. The display must stand firmly by itself.
More detail is at youthscience.ca.
Health regulations do not allow samples of food or drink to be handed out. Nothing on the display may harm students or the public. Use photos or empty containers instead of the real thing.
- Open liquids, chemicals, drugs, pills, medicines, alcohol, fertilizer, herbicide, pesticide, gasoline, oil, household cleaners, pool chemicals, aerosol cans, crystals, mercury thermometers and other poisonous items
- Flames and hot substances (plugged-in heaters, kettles, and light bulbs without a protective guard)
- Exposed or dangerous electrical wiring, or anything over 36 V
- Firearms, explosives and lasers (including laser pointers)
- Unprotected sharp or moving objects
- Flammable materials, including the products used to set up the display
The project experiment is not conducted on the exhibit floor. Parts of an experiment that pass the safety check may sometimes be demonstrated. Anything that does not pass is not allowed on the exhibit floor.
All projects must pass a safety check while displays are set up on vendredi 2 avril evening (vendredi 16:30–20:30), and must stay safe for the whole fair. Any problem must be fixed, or the project is disqualified.
The fair is on samedi 3 avril 2027 at École secondaire St. Lawrence, 1450 Second St E, Cornwall, ON.
For more information, visit ucsfair.org or contact the chair: Jason Marshall, chair-test@ucsfair.org, 343-370-7469.
Téléchargements
-
Information package (PDF)
Entry deadline, quota, eligibility and display rules on one printable sheet.
Science sur le mur (Classes de la 1re à la 5e)
Comment vos classes de la 1re à la 5e année participent avec des affiches.
Comment un cours participe
Science sur le mur est un programme d’affiches pour les élèves de la 1re à la 5e année inscrits dans les écoles publiques S.D.&G., S.D.&G. Catholic Schools ou Akwesasne Mohawk School Board. Les élèves ne s’inscrivent pas ; vous choisissez les affiches et les envoyez. Une affiche est réalisée par un ou deux élèves.
Chaque classe dans votre école peut envoyer 1 affiche pour chaque 8 élève de cette année, arrondie :
| Élèves de la classe | Affiches autorisées |
|---|---|
| 1 à 8 | 1 |
| 9 à 16 | 2 |
| 17 à 24 | 3 |
| 25 à 32 | 4 |
| 33 à 40 | 5 |
Et ainsi de suite. Exemple : 70 élèves en classe ÷ 8 = 8,75, arrondi à 9 affiches.
Étape par étape
- Partagez les règles et idées d'affiches avec votre classe.
- Choisissez les affiches de votre école, dans le cadre de votre quota.
- Assurez-vous que chaque affiche porte le nom, la classe, l'école et l'enseignant de l'élève au verso (une étiquette imprimable est ci-dessous).
- Si possible, envoyez par e-mail une liste des participants dans un fichier Excel ou Word à chair-test@ucsfair.org, avec : titre, nom de l'élève, nom du partenaire (s'il y en a), école, classe et professeur. Cela garantit une orthographe correcte.
- Envoyez les affiches à St. Lawrence Secondary School, 1450 Second Street East, Cornwall, Ontario, afin qu'elles soient reçues par lundi 8 mars 2027.
- Toutes les affiches sont exposées à l'Expo-sciences. Les affiches gagnantes reçoivent des rubans. Les affiches et rubans sont retournés à votre école après l'Expo-sciences.
Téléchargements
-
Poster label (PDF)
Print a label for each poster and attach it to the back.
-
Rules and information sheet (PDF)
The poster rules, quota and drop-off details on one printable sheet.
Des questions ? Contact info-test@ucsfair.org